Supply Beijing 60KW electromagnetic energy granulator granulator heater manufacturers use: use plastic granulator extruder according to the angle between the direction and the screw head stream centerline, will head into the bevel head (angle 120o) and crosshead. Head of the shell is bolted to the body, the mold has a mandrel head inside to sit and fixed in front of the nose into the line port, the mandrel holder is equipped with a nut core, core and core seat The center hole for passing wires; in front of the nose ring is equipped with equalizing for equalizing pressure; extruded shaped in part by the die sets and die sets consisting of seat, the location of the die case can be adjusted by the support bolt to adjust the relative position of die sets for the mandrel, easy to adjust the uniformity of the extruded cladding thickness. Head outside with a heating device and a temperature measuring device. Uses: This machine is mainly for extruding PC, PA | ABS, PS, PE and other thermoplastic granulation purposes, different screw can produce different plastics, coupled with different die and auxiliary equipment, can also be extruded cable, film , tubes, plates, ribbons! Granulator, plastic granulator use plastic crusher, plastic granulator, plastic shredders and other plastics machinery, welcome you to visit the company! Pelletizing equipment and broken washing machine, granulator matching. Broken cleaned plastic, not Liangshai, can be put directly extrusion granulation process is simple, advanced technology, and is applicable to different waste plastics. Equipment can be wet and dry, its dual exhaust, drainage, power, non-stop for the leading domestic network. After the increase with the die, but also the production of films, plates, tubes, wire, profiles and other comprehensive performance is better than the existing domestic other models. Automatic temperature control electric heating, little electricity, no pollution, high degree of automation.