Supply of high vacuum diffusion pump 10kw heating devices typically diffusion pump performance is the ultimate vacuum, the largest anti-pressure, ventilation rate, and set a cold trap or low depending on the bezel. 1. If the general structure of the ultimate vacuum diffusion pump oil to improve, such as reducing oil vapor reflux, plus topping, a reasonable allocation of heating power, improved nozzle design point of view, to block the oil cap, baffles or cold traps, adsorption wells, etc., can greatly improve the performance of the diffusion pump, ultimate vacuum can be achieved at lower pressure. 2. The maximum pressure of the biggest anti-anti-pressure means the maximum pressure front diffusion pump allows. If the pressure before the pump is higher than the maximum anti-generated pressure, the diffusion pump will not work. 3. The rate of diffusion pump pumping pumping speed according to the kinetic theory of gases to be calculated. 4. Set the cold traps and cold baffle nozzles reasons due to the diffusion pump oil vapor molecules, the majority of the wall by the pump is condensed, because the outer wall of the pump or a cooling water jacket cooling duct's sake. But there is a small part of the vapor molecules is pumped wall reflection, scattering returns have been drawn space, a phenomenon in low-temperature laboratory should pay special attention. As in the diffusion pump and add cold trap before being pumped cryogenic containers or baffle, so that we can make a returning vapor is condensed, as the oil vapor regurgitation. Supply of high vacuum diffusion pump 10kw heating equipment TUNG contact QQ: 1912144109 Tel 18924289108 as required to know more information, please click on the official website http://www.rzdc158.com/